Skip to content
English
Create ticket
Contact
  • There are no suggestions because the search field is empty.

Getting Started - Installation Instructions

A guide to installation and a list of all commands in SuCri

Installation of SuCri

Module 1: Installation

- Select your desired extensions in the dialog.
- Specify the correct content path for installation.
- Run the installation.
- Start Plant 3DTM and activate your license.
- Load the pipe classes into your project.
- Place a component in the model space.

Module 2: Installation

- Select your desired extensions in the dialog.
- Start Plant 3DTM and activate your license. Check if you see the corresponding icon in the ribbon bar for Module 2.
- Test some Module 2 features, e.g. Turbo Tools and Dynamic Properties.

Module 3: Installation

- Select your desired extensions in the dialog and continue with the installation.

- Navigate to %Appdata%\IntegaDesign GmbH\SuCri\Modul3 und run the patcher (SuCri_AS_DB_PATCHER.exe) there and follow the instructions. If you have already installed Modul3, we recommend that you first select option 6 in the last question.

- Please run the patcher again and then select option 5.
- If you have already installed another extension for Module 3, it is sufficient to simply select option 3 in the patcher.

Attention: If you are working with Advance Steel 2025+, it is mandatory to download from the folder

%Appdata%\ Autodesk\ApplicationPlugins\SuCri_Modul3.bundle\Binaries\2025
the file „IntegaDesign.Sucri.Drivers.dll“ in the local path C:\Program Files\Autodesk\AutoCAD 2025\ADVS

or copy to C:\Program Files\Autodesk\AutoCAD 2026\ADVS. (This requires admin rights.)

- Start Advance SteelTM and activate your license. Check if the corresponding icon is displayed in the ribbon bar.
- Then check if you can insert the profiles and connections as shown in the demo videos.

Module 4: Installation

- Select your desired extensions in the dialog.
- Start Plant 3DTM and activate your license. Check if you see the corresponding icon in the ribbon bar for Module 4.
- Set up your ortho template with the appropriate views as shown in the demo videos.
- Assign an SU number using the secondary steel construction functions and derive a first drawing.

Tipp:

The default ortho template of a Plant 3DTM project is located within the project in the folder  „Orthos\Styles\Default“. There you will find “Ortho - A1 -Color Dependent Plot Styles.dwt”, which you can modify as desired.

Download Cheat sheet

In this downloadable document, you will find:
  • the above  installation instructions
  • an overview of the ribbon and license manager
  • a list of all available commands
and can use it as a cheat sheet for your daily work.