7. Custom Settings
      Back to home
      1. SuCri - User guide
      2. 7. Custom Settings

      DimOption module 4

      Die Tabelle im Reiter DimOption beschreibt Dimensionseinstellungen mit den Feldern DimType, Value, View und Description.

      DimType
      DimCenterBetweenSupports
      Value
      2
      View
      Front, Left, Right
      Note
      Value: 0 = Off 1 = On 2 = On, no dim duplicated if all support row have same distance View: All/Front/Back/Top/Bottom/Left/Right
      Description
      Defines how dimensions between supports are handled: 0 = Off: No dimensions will be created. 1 = On: Dimensions will be created. 2 = On, no duplicated dimensions: Dimensions will be created, but no duplicates if all support rows have the same distance. Views: All: For all views. Front/Back/Top/Bottom/Left/Right: For specific views.
      DimType
      DimSupportHeights
      Value
      1
      View
      Front, Left, Right
      Note
      Value: 0 = Off 1 = On 2 = On, no dim duplicated if all shoe have same height View: All/Front/Back/Top/Bottom/Left/Right
      Description
      Defines how dimensions for pipe shoe heights are handled: 0 = Off: No dimensions will be created. 1 = On: Dimensions will be created. 2 = On, no duplicated dimensions: Dimensions will be created, but no duplicates if all pipe shoes have the same height. Views: All: For all views. Front/Back/Top/Bottom/Left/Right: For specific views.
      DimType
      DimProfilesToVertical
      Value
      2
      View
      Front, Left, Right
      Note
      Value: 0 = Off 1 = Connected profile to vertical profile will be dim to center 2 = Connected profile to vertical profile will be dim from edge View: All/Front/Back/Top/Bottom/Left/Right
      Description
      Defines how dimensions for connected profiles to a vertical profile are executed: 0 = Off: No dimensions will be created. 1 = Dimension to center: The connected profile will be dimensioned to the center of the vertical profile. 2 = Dimension from edge: The connected profile will be dimensioned from the edge of the vertical profile. Views: All: For all views. Front/Back/Top/Bottom/Left/Right: For specific views.
      DimType
      DimHorizontalProfiles
      Value
      1
      View
      Front, Left, Right
      Note
      Value: 0 = Off 1 = Connected profile to vertical profile will be dim to center 2 = Connected profile to vertical profile will be dim from edge View: All/Front/Back/Top/Bottom/Left/Right
      Description
      Specifies how dimensions are handled for profiles connected to a vertical profile: 0 = Off: No dimensions will be created. 1 = To center: Dimensions are measured to the center of the vertical profile. 2 = From edge: Dimensions are measured from the edge of the vertical profile. Views: All: For all views. Front/Back/Top/Bottom/Left/Right: For specific views.
      DimType
      DimAllOtherOrientedProfiles
      Value
      1
      View
      Front, Left, Right
      Note
      Value: 0 = Off: No dimensioning is applied for profiles running diagonally or in non-horizontal/vertical directions. 1 = To center: Diagonal profiles are dimensioned to their center. 2 = From edge: Diagonal profiles are dimensioned from their edge. View: All/Front/Back/Top/Bottom/Left/Right
      Description
      Defines how profiles running in directions other than horizontal or vertical are dimensioned: 0 = Off: No dimensions will be created. 1 = To center: Dimensions are measured to the center of the connected profile. 2 = From edge: Dimensions are measured from the edge of the connected profile. Views: All: Applies to all views. Front/Back/Top/Bottom/Left/Right: Applies to specific views.
      DimType
      PlateDetail
      Value
      1
      View
      Top
      Note
      Value: 0 = Off, 1 = On View: All/Front/Back/Top/Bottom/Left/Right
      Description
      Specifies whether additional dimensions, such as hole distances or overall plate dimensions, should be displayed in sectional views with plates. Values: 0 = Off: No additional dimensions are displayed. 1 = On: Additional dimensions, such as hole distances and plate dimensions, are displayed. Views: All: Applies to all views. Front/Back/Top/Bottom/Left/Right: Applies to the specified view. Note: This function currently does not work with all plates.